Petzl Sequoia SRT

Size Selection Guide:

Size	Waist Size
One	70-100 cm
Two	85-120 cm

The Sequoia SRT arborist harness is the bigger brother to the standard Sequoia and is designed for use in both traditional (DbRT)and single rope (SRT) climbing techniques. This harness includes a waist connection point at the front of the saddles as well as a shoulder strap connection point at the rear  to accommodate a Croll plus Secur chest ascender assembly for SRT (Singe Rope Technique). The bridge is attached to the waistbelt and the two leg loops by two gated rings. This distributes pressure evenly between the waistbelt and the leg loops. The bridge is easily adjusted and you can add other accessories like swivels or additional rings. The waist connection point can also be used to connect a descent control device. Waist belt comes with a multitude of tool attachment points: 5 gear loops, two side plastic rings to attach hand saws, 7 webbing slots to accept 4 small and 3 large Caritool tool holders. Better suited to small to medium size climbers. Certified to EN 358:2000 and EN 813:1997.